WandererCover V4-EC
Professional lightweight motorized flat panel

What's the difference?
*Added 12V DC input port
*Added power/USB indicator light
*Soft pads to protect the lens barrel

(Note: 12V power supply is required)
The built-in encoder provides real-time and accurate feedback on the position of the cover, allowing users to remotely view the status of the flat field plate without opening the monitor camera. Repeatable positioning accuracy is higher than ±0.25 degrees.
Brand new motor adopted, the payload is increased by more than 50%, ensuring its durability and preventing gearbox damage.
In humid areas, dew will occur on the flat plate at night. If the dew does not evaporate in time, it will easily make the inside of the telescope moist after closing, which may cause the lens to become damp and moldy in the long term.
V4-EC has built-in heating elements and provides three levels of heating adjustment, which can keep the cover dry all night or quickly evaporate dew in the morning.
Thanks to the encoder, V4-EC provides reliable automatic detection of the open and closed position. If your device is not around and manual setting is not possible, WandererCover can automatically detect obstacles and set the open and closed position.
The new ASCOM driver makes use easier. The All-in-one driver will automatically identify the device model and connect. It also supports automatic/manual port selection and connection of multiple devices. The control interface has also been optimized and is now more beautiful.
The new dimming controller increases the PWM dimming frequency by 100% to further avoid the occurrence of bandings. 255 levels of dimming meet the needs of flat-field shooting in most situations.

Note: The brightness of flat panels from different batches is slightly different.
Maximum brightness range: F7, ASI2600MM, Gain100, Antlia 3nm pro H channel, 6 to 26 seconds of exposure to reach 30000 ADU.
Minimum brightness range: F7, ASI2600MM, Gain0, L channel , 5 to 20 seconds to reach 30000 ADU.
What's included